The tree pool grate is usually also known as the tree guard board, tree grate, tree pool cover plate, etc., and now generally refers to the tree pool grate made of FRP. It is a glass fiber-reinforced material with unsaturated polyester resin and a plate composite with many spaces. Usually used as municipal construction or road greening projects. Its installation requires the following steps.
1.The tree pit is flat. Due to the new tree pit, it must be checked and filled in time. A 125px thick stone can be paved in the tree pit to prevent the tree pool grate from hanging or the motor vehicle pressure.
2. measures the size of the tree pool and the diameter of the tree, and cuts the suitable tree pool grate.
(1) Two panels are generally required, if the whole tree pit size is 1 * 1, and two 0.5 * 1 panels need to be cut together.
(2) Cut the gap of the tree, if the tree diameter of 500px, needs to cut off 500 px*750px along the middle of the edge of 0.5 * 1.After splicing together, the size of the middle of the trap grate is 30 * 750px.
3. The splicing of pool grate plate requires suitable card fixed, and professional glass steel grille card is spliced and fixed.